Samsung HT-DS140 - Manual (Page 59)

58
Presetting Stations
To tune in to a preset station, press on the
remote control to select a channel.
• Refer to Step 2 on page 57 to
automatically or manually tune in
to a station.
2 1
• Each time the button is pressed,
the band switches between
"FM" and "AM".
TITLE CHAP PRGM RDS RT ST TUNED
kHz
MHz
TITLE CHAP PRGM RDS RT ST TUNED
kHz
MHz
TITLE RDS RT ST TUNED
kHz
MHz
• “PRGM” flashes in the display.
3
Example: Presetting FM 89.1 in the memory
Press to
select "89.10".
Press the
TUNER(BAND)
button and select
the FM band.
• Press the TUNER MEMORY button before
‘PRGM’ disappears from the display.
• ‘PRGM’ disappears from the display and
the station is stored in memory.
5 4
• You can select between 1 and
15.
TITLE RDS RT ST TUNED
kHz
MHz
TITLE CHAP RDS RT ST TUNED
kHz
MHz
Press the TUNER
MEMORY button.
Press the TUNER
MEMORY button
again. 6 To preset another
station, repeat
steps 2 to 5. Press
to select a preset
number.
You can store up to:
•
15 FM stations
•
15 AM stations
• FM Frequency Modulation
• AM Medium Wave
RADIO OPERA
TION
37P~66P(DS140)-Sea 9/15/04 6:12 PM Page 59