66). th, Sending a fax by automatic dialling, Automatic redialling – Sharp FO-IS115N User Manual

Page 71: Using the redial key

Advertising
background image

Sending a Fax by Automatic Dialling

66

Automatic redialling

If you use auto dialling (including Direct Keypad Dialling) to send a fax and the
line is busy, the machine will automatically make three redial attempts at
intervals of five minutes.

During this time, [RECALLING] will appear in the display, followed by the
attempt number.

To clear the message and stop automatic redialling, press

. If there

are multiple fax numbers being automatically redialled, only the number
that was attempted first will appear in the display. To cancel automatic
redialling of a different number, see Checking and cancelling stored fax
jobs
on page 67.

Under certain conditions, automatic redialling may stop before three redialling
attempts are made.

STOP

Using the REDIAL key

To redial the last number dialled on the machine, press

. The speaker

will be automatically activated. To fax a document, press

when you hear

the fax tone after the other machine answers.

REDIAL

START

3

Check the display. If the number shown is correct, press

.

If the number is not correct, press

to clear the incorrect digits, and

then re-enter the correct digit(s).

START

STOP

Advertising