Sharp FO-IS115N - Manual (Page 98)

Receiving Faxes to E-mail/Folder
93
7. Special Functions
3
Press to select “SET”.
•
To clear a previously stored group, press .
4
Enter a 2-digit number from “01” to “30” (this number is used to identify
the group you will store).
•
If you are clearing a group, enter the 2-digit number of the group you wish
to clear and go to Step 8
5
Enter the originating fax number.
•
If you wish to have faxes from all originating fax numbers forwarded
(“TRANSFER ALL”), go directly to Step 6 without entering a fax number.
6
Press .
7
Specify the destination (e-mail address, network folder) to which you
wish to have the faxes forwarded using one of the methods below:
•
Rapid Key Dialling: Press a Rapid Key.
•
Speed Dialling: Press and enter a 3-digit Speed Dial number.
•
Search Dialling: Press or until the destination appears in the
display.
8
Press . The group is stored.
•
If [NETWORK FOLDER IS ALREADY USED] appears, the same
originating fax number (or “TRANSFER ALL”) has already been stored in a
group with a network folder. In this case, only an e-mail address can be
stored for the forwarding destination.
START
SPEED DIAL
START