Sony NF401 - Manual (Page 25)

25
B Using the radio
Improving broadcast
reception
For FM, extend the headphones/earphones
cord.
Headphones or earphones
For AM, reorient the CD player itself.
Note
Keep the headphones/earphones connected to the
i
jack of the CD player. The headphones/
earphones cord works as the FM antenna.
If it is hard to hear the FM/
TV/WB broadcast (for U, CA,
E92, MX2* models)
1 While listening to the radio, press and
hold DISPLAY/MENU until the display
changes.
LOCAL
>AVLS
2 Press
V
or
v
to select “LOCAL,” then
press u/ENTER.
3 Press
V
or
v
to select “ON,” then press
u/ENTER to enter the selection.
* For the area code of the model you purchased,
check the upper left side of the bar code on the
package.
Using the radio
(Continued)
Listening to the radio
You can enjoy FM and AM programs.
1
Press RADIO ON/BAND to turn on
the radio.
2
Press RADIO ON/BAND until the
band you want appears.
Each time you press the button, the
display changes as follows:
USA and Canadian models:
B
FM t AM t TV t WB
Other models:
B
FM t AM
3
Press TUNE + or – to tune in the
station you want and adjust the
volume.
Turning off the radio
Press x•RADIO OFF.
Tuning in the station quickly
Hold down TUNE + or – in step 3 until the
frequency digits begin to change in the
display. The CD player automatically scans
the radio frequencies and stops when it finds
a clear station.