Sennheiser EW100 G2 User Manual
Sennheiser Audio
Advertising
Table of contents
Document Outline
- Safety instructions
- Contents
- The evolution wireless series ew 100 G2
- System variants
- Overview of operating controls
- EM 100 G2 rack-mount receiver
- EK 100 G2 bodypack receiver
- SK 100 G2 bodypack transmitter
- SKP 100 G2 plug-on transmitter
- SKM 100 G2 radiomicrophone
- Indications and displays on the receivers
- Operation and battery status indication (EK 100 G2 only)
- Transmitter battery status indication (EM 100 G2 only)
- “MUTE” display
- RF signal indication (EK 100 G2 only)
- Modulation display of the receiving transmitter
- “PILOT” display
- Diversity display (EM 100 G2 only)
- Display backlighting (EK 100 G2 only)
- Indications and displays on the transmitters
- Preparing the components for use
- Using the components
- The operating menu
- Adjustment tips for the operating menu
- Switching between channel banks
- Switching between the channels in a channel bank
- Selecting the frequencies to be stored in the channel bank “U”
- Scanning the channel banks for free channels (receivers only)
- Multi-channel operation
- Adjusting the sensitivity (transmitters only)
- Adjusting the audio output level (receivers only)
- Adjusting the squelch threshold (receivers only)
- Selecting the standard display
- Entering a name
- Loading the factory-preset default settings
- Activating/deactivating the pilot tone transmission or pilot tone evaluation
- Activating/deactivating the lock mode
- Exiting the operating menu
- If problems occur
- Care and maintenance
- Additional information
- Specifications
- Accessories
- Manufacturer declarations