Indications and displays on the receivers, Mute” display, Rf signal indication (ek 100 g2 only) – Sennheiser EW100 G2 User Manual

Page 11

Advertising
background image

11

Indications and displays on the receivers

Operation and battery status indication (EK 100 G2 only)

The red LED (LOW BAT/ON)

provides information on the current operating

state of the EK 100 G2:

Red LED lit up:

The receiver is switched on and the capacity of the bat-
teries/accupack BA 2015 is sufficient.

Red LED flashing:

The batteries are/the accupack BA 2015 is going flat
(LOW BAT)!

In addition, the 4-step battery status display

on the display panel provides

information on the remaining battery/accupack BA 2015 capacity:

Transmitter battery status indication (EM 100 G2 only)

When the capacity of the transmitter batteries/accupack is so low that the
batteries/accupack must soon be replaced (LOW BAT), the transmitter trans-
mits information on its remaining battery/accupack capacity to the
EM 100 G2 receiver and the transmitter low battery icon

starts flashing on

the receiver display panel.

“MUTE” display

The “MUTE” display

or

appears

when

y the RF signal of the received transmitter is too weak,
y the received transmitter has been muted (with the pilot tone transmission

or evaluation activated).

RF signal indication (EK 100 G2 only)

The green LED (RF)

at the front of the EK 100 G2 lights up when an RF sig-

nal is being received.

»

3 segments:

capacity approx. 100 %

2 segments:

capacity approx. 70 %

1 segment:

capacity approx. 30 %

Battery icon flashing:

LOW BAT

EK 100 G2

EM 100 G2

¿

Advertising