Sennheiser EW100 G2 - Manual (Page 38)

38
... for multi-channel operation
y For multi-channel operation, you can only use the channels in a channel
bank. Each of the channel banks “1” to “8” accommodates four factory-
preset frequencies which are intermodulation-free. For alternative fre-
quency combinations, please refer to the enclosed frequency table. The fre-
ely selectable frequencies can be selected via the “
TUNE ” menu and can be
stored in the channel bank “U”.
y When using several transmitters simultaneously, interference can be avoi-
ded by maintaining a minimum distance of 20 cm between two transmit-
ters.
y Use special accessories for multi-channel applications (see: „Accessories“
on page 45).
Care and maintenance
Use a slightly damp cloth to clean the units from time to time.
Note:
Do not use any cleansing agents or solvents.
To clean the SKM 100 G2’s sound inlet basket, proceed as follows:
̈
Unscrew the sound inlet basket (turn counterclockwise) and remove it.
̈
Remove the foam insert.
̈
Use a slightly damp cloth to clean the sound inlet basket from the inside
and ouside.
̈
Reinsert the foam insert.
̈
Replace the sound inlet basket on the SKM 100 G2 and screw it tight
(taking care not to loose the colored identification ring).