Sima Products SELECTORS SSW-4 - Manual (Page 7)

Page 7
Trouble Shooting
Problem Solution
No sound
Make sure correct speaker is selected.
Make sure no wires are touching each other or the
case of the amplifier or SSW-4/ SSW-6 selector.
One or both speakers
turn off when music is
playing Reduce volume level and unit will automatically
reset. Internal protection circuit is detecting
overload or excessive volume level and is shutting
off speakers.
Slight drop in volume
when PROTECTION
is turned on Normal - This is due to the additional resistance
added to protect your amplifier.
Unit gets very hot Reduce volume level.
Turn unused speakers off.
If only one speaker pair is used, turn PROTECTION
switch off.
Technical Specifications
Input
100 watt per channel max
Outputs
4 Speaker pairs (SSW-4), 6 Speaker pairs (SSW-6)
4 to 16 ohm impedance
Protection Circuit
Amplifier Protection: 3 ohm resistor per channel
Unit Protection: Automatic resetting poly switch
Wire gauge
14 to 22 gauge
Size: 11.75” wide, 6.5” deep, 2” high
Weight: 3 lbs
Supplied accessories
User Manual (this document)
Sheet of front panel labels
Design and specifications are subject to change without notice.