Staple sort, Using the radf, Auto exposure – Sharp AR-337 User Manual

Page 134: Finisher (ar-fn2)

Advertising
background image

7-22

CHAPTER

7

Staple sort

The STAPLE SORT mode staples 8-1/2" x 11" size copies. Stapled
sets cannot be delivered to the top tray.

NOTE:
Different size originals cannot be copied onto copy paper of their
respective sizes in the STAPLE SORT mode. Only 8-1/2" x 11" size
paper can be selected in the STAPLE SORT mode.

Using the RADF

1

Set the originals in the document feeder tray.

If the number of copies in one set is more than 30, the copies
will not be stapled.

If the orientation of the originals does not match that of the copy
paper, the images of the originals will be rotated. The stapling
position in this case is shown below.

If originals in the landscape orientation are copied, the copies
will be stapled at an improper position.

2

Press the OUTPUT key.

3

Press the “STAPLE SORT” key on the touch panel.

Stapling position

AUTO

EXPOSURE

READY TO COPY.(DOCUMENT FEEDER MODE)

OUTPUT

TOP TRAY

SORT

OFFSET

TRAY

STAPLE

SORT

GROUP

OK

AUTO

EXPOSURE

PAPER SELECT

100%

COPY RATIO

AUTO 8/ 11

1

2

OPTIONAL EQUIPMENT

Finisher (AR-FN2)

FINISHER (AR-FN2)

Advertising
This manual is related to the following products: