Southbend SSB-45 - Manual (Page 13)

R ADIANT S TEAKHOUSE B ROILER I NSTALLATION
S TEP 2 B : A TTACH C OUNTERTOP L EGS
The broiler may set on a countertop using short legs. Be sure that the countertop is rated to support the crated weight
of the broiler (see Figure 2 on page 5). The model number is shown on the serial plate located in the rear right corner
of you broiler (see Figure 1 on page 3).
1. With the broiler lying on its back side, screw the four legs tightly into the leg pads, as shown below. Lift the broiler
(using two people is recommended) and set it in place on the countertop. Adjust the legs as needed to level unit.
2. Position the broiler to the specified minimum clearances (see page 4).
3. Go on to Step 3.
Figure 5
Installation on Countertop
Screw legs into leg pads here.
O WNER ’ S M ANUAL 1190950 (02/09) P AGE 13 OF 20