Sony AIR-SA20PK - Manual (Page 18)

AIR-SA20PK.GB.4-117-793-32(1)
1 GB
To use the remote
Slide and remove the battery
compartment lid, and insert the two
supplied R03 (size AAA) batteries, 
side first, matching the polarities shown
below.
Remote for the main unit
(RM-ANU0)
Remote for the sub unit
(RM-ANU0)
Notes on using the remote
 With normal use, the batteries should last for
about six months.
 Do not mix an old battery with a new one or
mix different types of batteries.
 If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
Establishing the S-AIR
connection
You can easily establish the connection
by setting the same S-AIR ID for the
main unit and the sub units.
1
Check.that.the.wireless.
transceivers.are.inserted.
securely.to.the.main.unit.and.
the.sub.units.(page.17).
2
Turn.on.the.main.unit.and.the.
sub.units.
Main.unit
Set the POWER switch on the rear
panel to “ON.”
The POWER indicator on the unit
lights up.
Sub.units
Press .
3
Set.the.same.S-AIR.ID.for.the.
main.unit.and.the.sub.units.
Main.unit
Set the S-AIR ID selector on the rear
panel to the desired S-AIR ID.
Sub.units
Set the S-AIR ID selector on the rear
panel to the same S-AIR ID as the
main unit.
Tip
The S-AIR ID is set at the factory to “A.”