Musical room calibration, Eq optimizer, Hdmi audio – Samsung AH68-02258S User Manual

Page 33

Advertising
background image

English

33

03

Setup

Musical Room Calibration

By setting the Musical Room Calibration (MRC)
function just once when you relocate or install the
product, you can have the product automatically
recognize the distance between speakers, levels
between channels, and frequency characteristics
to create a 5.1-channel sound fi eld optimized for
your environment.

ASC IN

ASC

microphone

Musical Room Calibration

You will hear either the Musical Room Calibration
mode or the User Speaker Settings.

Off: You will hear sound in the the Speaker
Setting value.

On: You will hear sound in the Musical Room
Calibration mode.

Musical Room Calibration Setting

Plug the ASC microphone into the ASC IN jack.

Place the ASC microphone at the listening position.

Musical Room Calibration will be automatically
set up in the following sequence:
Front Left Center Front Right
Surround Right Surround Left
Subwoofer

Press the RETURN button to cancel the
Musical Room Calibration Setting.

When the message "REMOVE MIC" appears
in the display, unplug the ASC microphone.

1.

2.

NOTE

Setting the Musical Room Calibration
function takes about 3 minutes.
The Musical Room Calibration setup can be made
when there is no disc in the product.
If the ASC microphone is disconnected during the
Musical Room Calibration setup, the setup will be
canceled.
When the Musical Room Calibration function is
activated, the DSP, Dolby Pro Logic ll and SFE
Mode will not work.
If the product is connected to external devices or
other components (such as an iPod, AUX, D.IN),
the Musical Room Calibration Setup may not work
properly.

EQ Optimizer

Set optimal EQ automatically depending on the
region.

Off : Turn EQ Optimizer off.

On : Turn EQ Optimizer on.

HDMI Audio

The audio signals transmitted over the HDMI
Cable can be toggled On/Off.

Off : Video is transmitted over the HDMI
connection cable only, and audio is output
through your product speakers only.

On : Both video and audio signals are
transmitted over the HDMI connection cable,
and audio is output through your TV speakers
only.

NOTE

HDMI Audio is automatically down-mixed to
2ch for TV speakers.


HT-C5500_XAC_0129.indd 33

HT-C5500_XAC_0129.indd 33

2010-01-29 3:24:46

2010-01-29 3:24:46

Advertising
This manual is related to the following products: