Sony STR-DG1000 - Manual (Page 39)

39 GB
G
e
tting Star
te
d
To switch the command mode
of the RM-AAL003 remote
1
Press ?/1 while pressing RM
SET UP.
The RM SET UP button flashes.
2
Press 1 or 2 while the RM SET
UP button is flashing.
When you press 1, the command mode is
set to AV SYSTEM 1. When you press 2,
the command mode is set to AV SYSTEM
2.
3
Press ENTER when the RM SET
UP button lights up.
The RM SET UP button flashes twice,
then the command mode setting process
is completed.
Tip
When you press RM SET UP, use a thin wire, such
as a paper clip.
6: Setting the speakers
Set the appropriate speaker impedance for the
speakers you are using.
1
Turn on the receiver.
2
Press RECEIVER.
Receiver operation is enabled.
3
Press MENU.
The list of setting menus appears.
4
Press V/v repeatedly to select
“System Settings,” then press
to enter.
5
Press V/v repeatedly to select
“SP. IMPEDANCE,” then press
to enter the parameter.
3
2
1
Setting the speaker impedance
1
2
4-6
3,7
continued