Sony PT-47WX53 - Manual (Page 19)

R EMOTE C ONTROL O PERATION ( MOD ELS PT-47/53/56WX53, PT-53/56TW53 AN D PT-4743)
17 l
E
N
G
L
IS
H
Programming the Remote
The Universal Remote Control can be programmed to
operate many manufacturers’ components, using the
component function buttons for VCR, DVD, AUX, RCVR,
TV, DTV CABLE or DBS. Follow the procedures for
programming your Remote Control with or without a code
for the component.
Note: Determine the manufacturer of the component and look
in the table for the code.
Programming with a Code
Procedure
• Confirm that the external component is plugged in
and operating.
• Turn the component off.
• Press and together, for at least 5
seconds.
• Press appropriate component button on the
Remote Control VCR, DVD (CD), AUX (VCR2 or
TAPE), RCVR, DTV, CABLE or DBS.
• Enter the 3-digit component code using the
Remote Control numeric keypad (0 - 9 buttons).
• Press the Remote Control to test the
component. If the procedure was successful, the
component will turnon.
Note: If the component does not operate with the Remote
Control, repeat the procedure using another code.
(Some brands have multiple codes). If an incorrect code
is entered, or if the procedure takes longer than 30
seconds, the programming will fail.
Programming without a Code
This procedure searches all codes and is called the
“sequence method.”
Procedure
• Confirm that the external component is plugged in
and on.
• Turn the component off.
• Press and together, for at least 5
seconds.
• Press appropriate component button on the
Remote Control.
• Press VOL u to move forward to the next code.
Press t VOL to move backward.
• Press the Remote Control to test the
component. If the procedure was successful, the
component will turn on.
Note: Repeat the above steps until the component code is
found. it may take many attempts before the correct
code is found.
Component Codes
The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all the features found in each
model.
Default Modes for Remote Control
Device Operates Default
TV TV (Panasonic Only) Panasonic TV Code
DTV-STB DTV (Panasonic Only) Panasonic DTV Code
CABLE CABLE (Preset)
Panasonic CABLE
Code
DBS DBS (Preset) Panasonic DBS Code
VCR VCR (Preset0 Panasonic VCR Codes
DVD/CD DVD and CD (Preset) Panasonic DVD Codes
AUX Personal Video Recorders,
Tape and VCR2
Panasonic Personal
Video Recorder Code
RCVR Audio receiver (Preset) Panasonic RCVR code
ACTION
POWER
POWER
Write the code numbers from tables in this space.
This will serve as a reference if you need to program
your Remote Control.
VCR DVD DVD (CD)
AUX (VCR2) AUX (TAPE) RECEIVER
CABLE DBS
ACTION
POWER
POWER
new2prod 0470-1 E doc2.fm Page 17 Friday, May 2, 2003 12:31 PM