Samsung ML-331X - Manual (Page 127)

24 2. Using a network-connected machine
IPv6 configuration
IPv6 is supported properly only in Windows Vista or higher.
If the IPv6 network seems to not be working, set all the
network setting to the factory defaults and try again using
Clear Setting (see "Network" on page 64).
In the IPv6 network environment, follow the next procedure to use
the IPv6 address.
1 Connect your machine to the network with a network cable.
2 Turn on the machine.
3 Print a Network Configuration Report that will check IPv6
addresses (see "Printing a network configuration report" on
page 13).
4 Select Start > Control Panel > Printers and Faxes.
5 Click Add a printer in the left pane of the Printers and Faxes
windows.
6 Click Add a local printer in the Add Printer windows.
7 The Add Printer Wizard window appears. Follow the
instructions in the window.
If the machine does not work in the network environment,
activate IPv6. Refer to the next section followed by.
 
10
Activating IPv6
1 Press the (Menu) button on the control panel.
2 Press Network > TCP/IP (IPv6) > IPv6 Activate.
3 Select On and press OK.
4 Turn the machine off and turn it on again.
5 Reinstall your printer driver.