Samsung ML-331X - Manual (Page 128)

IPv6 configuration
25 2. Using a network-connected machine
 
11
Setting IPv6 addresses
The machine supports the following IPv6 addresses for network
printing and managements.
• Link-local Address: Self-configured local IPv6 address (Address
starts with FE80).
• Stateless Address: Automatically configured IPv6 address by a
network router.
• Stateful Address: IPv6 address configured by a DHCPv6 server.
• Manual Address: Manually configured IPv6 address by a user.
DHCPv6 address configuration (Stateful)
If you have a DHCPv6 server on your network, you can set one of the
following options for default dynamic host configuration.
1 Press the (Menu) button on the control panel.
2 Press Network > OK > TCP/IP (IPv6) > OK > DHCPv6 Config.
3 Press OK to select the required value you want.
• DHCPv6 Addr.: Always use DHCPv6 regardless of router
request.
• DHCPv6 Off: Never use DHCPv6 regardless of router
request.
• Router: Use DHCPv6 only when requested by a router.
Manual address configuration
1 Start a web browser, such as Internet Explorer, that supports
IPv6 addressing as a URL.
2 When the SyncThru™ Web Service window opens, move the
mouse cursor over the Settings of the top menu bar and then
click Network Settings.
3 Click TCP/IPv6 on the left pane of the website.
4 Select the Manual Address check box. Then, the Address/
Prefix text box is activated.
5 Enter the rest of the address (e.g.,:3FFE:10:88:194::AAAA. “A” is
the hexadecimal 0 through 9, A through F).
6 Click the Apply button.