Samsung ML-331X - Manual (Page 154)

Wireless network setup
51 2. Using a network-connected machine
8 Click Next.
If the wireless security setting window appears, enter the
registered password (network key) and click Next.
9 The confirmation window appears, please check your wireless
setup. If the setup is right, click Apply.
Disconnect the network cable (standard or network). Your
machine should then start communicating wirelessly with
the network. In case of Ad-hoc mode, you can use a wireless
LAN and wired LAN simultaneously.
 
20
Turning the Wi-Fi network on/off
1 Check whether the network cable is connected to the
machine. If not, connect the machine with a standard network
cable.
2 Start a web browser such as Internet Explorer, Safari or Firefox
and enter your machine’s new IP address in the browser
window.
For example,
3 Click Login on the upper right of the SyncThru™ Web Service
website.
4 Type in the ID and Password then click Login.
• ID: admin
• Password: sec00000
5 When the SyncThru™ Web Service window opens, click
Network Settings.
6 Click Wireless > Custom.
You can also turn the Wi-Fi network on/off.
 
21
Troubleshooting
Problems during setup or driver installation
► Printers Not Found
• Your machine may not be turned on. Turn on your computer and
the machine.
• USB cable is not connected between your computer and
machine. Connect machine to your computer using the USB
cable.