Sony LMP-H200 User Manual

Projector lamp

Advertising
background image

Projector Lamp

......................................... (JP)

Operating Instructions ........................ (GB)

Mode d’emploi .................................... (FR)

Bedienungsanleitung .......................... (DE)

Manual de instrucciones ..................... (ES)

Istruzioni per d’uso ............................. (IT)

使用說明書 ......................................... (CS)

2-892-212-02 (1)

1

 2006 Sony Corporation

Printed in Japan

70

VOC (

)

Printed on 70% or more recycled paper using VOC (Volatile
Organic Compound)-free vegetable oil based ink.

/

1

2

OK

English

The projector lamp is designed to be used with the Sony projector. Before
replacing the lamp, read the Operating Instructions of the projector and
make sure that this lamp can be used for your projector.
When you replace the lamp, make sure you replace the air filter attached to
the lamp. Also, clean the ventilation holes (intake) at the same time.
To replace the lamp/air filter, refer to the Operating Instructions of the
projector.

Cautions

• The lamp becomes a high temperature after turning off the projector with

the ? / 1

key. If you touch the lamp, you may scald your finger. When

you replace the lamp, wait for at least an hour for the lamp to cool.

• When removing the lamp unit, make sure it remains horizontal. If you

pull out the lamp unit while tilted and if the lamp breaks, the pieces may
scatter, causing injury.

Notes

• If the lamp breaks, consult with qualified Sony personnel.
• Please do the following operations after replacing the lamp with a new

one. If you don’t so, the message “Please replace the Lamp/Filter.” may
appear at once after replacing the lamp.

1 Plug the AC power cord into a wall outlet.
2 Turn on the projector, then select Setup

menu. The following menu

appears.
“Settings for lamp replacement. Has the projection lamp been replaced?”.
Select “Yes”, if this screen appears.
If the message “Lamp replacement process is now complete” appears,
select “OK”.

Disposal of Used Lamp

This projector’s lamp contains mercury and should be disposed of properly.
Consult your local authorities regarding safe disposal. The material
contained in this lamp are similar to those of a fluorescent lamp, so you
should dispose of it in the same way.

For customers in the USA

This product contains mercury. Disposal of this product may be regulated if
sold in the United States. For disposal or recycling information, please
contact your local authorities or Electronics Industries Alliance (http://
www.eiae.org).

For customers in Europe

Disposal of Old Electrical & Electronic Equipment (Applicable
in the European Union and other European countries with
separate collection systems)

This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. The
recycling of materials will help to conserve natural
resources. For more detailed information about
recycling of this product, please contact your local
Civic Office , your household waste disposal service
or the shop where you purchased the product.

Supplied accessories

Air filter

(1)

Operating Instructions (this manual)
Warranty ceritificate

(1)

Advertising