Samsung HT-DT79 - Manual (Page 10)

GB
18
OPERA
TION
Disc Playback
• Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric
(0-9) buttons.
• By default, the remote control is set to work with Samsung TVs.
See page 61 for more information about remote control operation with other manufacturer's TVs.
2
3
Press the POWER
button to turn on
your Samsung TV
with this remote.
5 6
Press FUNCTION button
on the main unit or DVD
button on the remote to
enable DVD/CD playback.
1 Plug the main unit's
power cord into the
AC power supply.
4
Press DVD RECEIVER
button to switch to
DVD RECEIVER
mode.
Note
Your Home Theater is capable of playing DVD, CD, MP3/WMA and JPEG discs.Depending on the disc you are
using, these instructions may vary slightly. Read the instructions carefully before using.
Before Using Your Home Theater
To Operate your Samsung TV and the Home Theater with the HT-DT79's Remote Control
Press TV/VIDEO
button to select
VIDEO mode on
your TV.
VIDEO
Press TV button to
set the remote to TV
mode.
17
2
Load a disc.
• Place a disc gently into the tray with the disc’s label
facing up.
• Depending on the content of the disc, the initial screen may appear different.
1
Press OPEN/CLOSE button to open the
disc tray.
3
Press DISC SKIP button.
• Rotate the carousel tray so you can load the first ,
the second, the third discs.
4 Close the compartment by pressing the
OPEN/CLOSE button again.
DVD CD
• Playback starts automatically.
Note
HT-DT79(GB)1-38 4/20/06 10:55 AM Page 20