Sony BDP-S185/BX18 - Manual (Page 11)

11
H
o
o
ku
p
s and
Se
ttings
Step 2: Easy Setup
1
Insert two Size AA (R6) batteries by
matching the 3 and # ends on the
batteries to the markings inside the
battery compartment.
2
Plug the player into the AC outlet.
3
Press [/1 to turn on the player.
4
Turn on the TV, then switch the input
selector on your TV so that the signal
from the player appears on your TV
screen.
5
Perform [Easy Setup].
Follow the on-screen instructions to
make the basic settings using
</M/m/, and ENTER on the remote.
Connecting to the
Network
Use a LAN cable to connect to the LAN (100)
terminal on the player.
z
Using a shielded interface cable (LAN cable),
straight or crossing, is recommended.
To set the network settings
Select [Network Settings], [Internet
Settings], then [Wired Setup] (page 18), and
follow the on-screen instructions to complete
the setup.
When turned on for the first time
Wait for a short while before the player
turns on and starts [Easy Setup].
LINE OUT HDMI OUT LAN(100) AUDIO
PCM/DTS/
DOLBY DIGITAL
VIDEO
COAXIAL
R L
DIGITAL OUT
to AC outlet
Wired Setup
ENTER
</M/m/,
ADSL modem/
Cable modem Broadband
router
LAN cable
(not supplied)
Internet