Samsung Q1B - Manual (Page 46)

Connecting to a Wireless LAN (Optional) 46
Connecting to an Access Point (AP)
This section describes how to connect to an AP. You can access the network when you are connected
to an AP.
For more detailed information, about your network, such as the network key (encryption key),
ask your network administrator.
To connect to an AP, follow these steps:
1
Right-click(press and hold the Stylus Pen for more than 3 seconds) on the Wireless Network
Connections (
) icon on the taskbar, and select View Available Wireless Networks.
2
Select an AP (E.g. see the Test network diagram below) to connect to and click Connect.
If there is a configured network key for the AP, the Enter Network Key window appears. Enter
the Network Key and click the Connect button.
When on network key is defined for a selected AP, click on Link to display the warning message
box. Then click on Connect again in the box.
Now when Connected is displayed in the right corner of the AP information window, you can
access the network.
Checking the connection status
Move the mouse pointer over the Wireless Network Connection (
) icon on the taskbar to dis-
play the connection status.