Siemens SL370 - Manual (Page 31)

30
SMS (text messages)
Gigaset SL375 / AUS / A31008-M1903-C401-1-7619 / sms_BRD_neutral.fm / 14.8.07
Ve
rs
ion 4,
16
.09.
2005
Sending SMS messages to an e-mail
address
If your service provider supports the SMS
as e-mail feature, you can also send your
SMS messages to e-mail addresses.
The e-mail address must be at the begin-
ning of the text. You must send the SMS to
the e-mail service of your SMS send cen-
tre.
w
¢
î
¢
(mailbox, mailbox PIN)
¢
New SMS
Π/ ~
Load the e-mail address from
the directory or enter it
directly. End the entry with a
space or colon (depending on
the service provider).
~ Enter the SMS text.
§Options§ Press the display key.
Send Select and press §OK§ .
E-mail Select and press §OK§ . If the
number of the e-mail service is
not entered (page 33), enter
the number of the e-mail serv-
ice.
Send Press the display key.
Sending SMS messages as a fax
You can also send a SMS to a fax machine.
Precondition: Your network provider sup-
ports this feature.
¤
You are writing a SMS (page 28).
§Options§ Press the display key.
Send Select and press §OK§ .
Fax Select and press §OK§ .
s / ~ Select number from the direc-
tory or enter directly. Enter the
number with dialling code
(even if you are in the same
area).
Send Press the display key.
Receiving a SMS
All received SMS messages are saved in
the incoming message list. Linked SMS
messages are displayed as one message.
If this is too long or is not transferred com-
pletely, it is split into individual messages.
Since a SMS remains in the list even after
it has been read, you should regularly
delete SMS messages from the list.
The display tells you if the SMS memory is
full.
¤
Deleting SMS messages you no longer
require (page 31).
Incoming message list
The incoming message list contains:
u All received SMS messages, starting
with the most recent.
u SMS messages that could not be sent
due to an error.
New SMS messages are signalled on all
Gigaset SL37H handsets by the À icon in
the display, the flashing message key f
and an advisory tone.
Opening the incoming message list with
the f key
f Press.
Select mailbox if necessary and enter mail-
box PIN.
The incoming message list is displayed as
follows (example):
1 bold: number of new entries
regular: number of read entries
2 Name of mailbox, here: general mailbox
Open list with §OK§ .
An entry in the list is displayed e.g. as fol-
lows:
SMS: (2) 1
2
1234567890
21.11.05 09:45