Siemens SL370 - Manual (Page 59)

58
Base station settings
Gigaset SL375 / AUS / A31008-M1903-C401-1-7619 / registr_sett.fm / 14.8.07
Ve
rs
ion 4,
16
.09.
2005
Base station settings
The base station settings are carried out
using a registered Gigaset SL37H handset.
Protecting against unauthorised
access
Protect the system settings of the base sta-
tion with a PIN known only to yourself.
The system PIN must be entered when, for
example, registering/de-registering a
handset to/from the base station or when
restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base station (default setting: 0000)
to a 4-digit PIN known only to yourself.
Gigaset SL375: Setting a system PIN facili-
tates remote operation of the answer
machine (page 40).
w
¢
Ð
¢
Base
¢
System PIN
~ Enter the current system PIN
and press §OK§ .
~ Enter new system PIN. For
security the PIN is shown as
four stars (****).
s ~ Jump to the next line, re-enter
new system PIN and press §OK§ .
a Press and hold (idle status).
Resetting the system PIN
If you have forgotten your system PIN you
can reset the base station to the original
code 0000:
Disconnect the power cord from the base
station. Hold down the registration/pag-
ing key ÷ on the base station while
reconnecting the power cable to the base
station. Release the key after a time.
The base has now been reset and the
system PIN 0000 set.
Activating/deactivating
music on hold
w
¢
Ð
¢
Base
¢
Music on hold
Press §OK§ to activate or deactivate music
on hold ( = on).
Repeater support
With a repeater you can increase the range
and reception strength of your base sta-
tion. You will need to activate repeater
mode. This will terminate any calls that
are in progress at the time.
Precondition: A repeater is registered.
Eco mode is disabled.
w
¢
Ð
¢
Base
¢
Add. Features
¢
Repeater Mode
§Yes§ Press the display key.
When repeater mode is active, the menu
item is marked with .
Restoring the base station to
the factory settings
When the settings are restored
u eco mode is disabled,
u handsets are still registered,
u the system PIN is not reset,
u the SMS information services are not
reset.
w
¢
Ð
¢
Base
¢
Base Reset
~ Enter the system PIN and press
§OK§ .
§Yes§ Press the display key.
Cancel the restoring process by pressing
a or the display key
§No§ .
a Press and hold (idle status).
Please note:
Repeater support and eco mode (see page 12)
cancel each other out, i.e. both functions can-
not be used at the same time.
‰
‰