Connecting the base station to the pabx, Dialling modes and recall, Changing the dialling mode – Siemens SL370 User Manual
Page 60: Setting recall, Saving an access code (outside line code)
59
Connecting the base station to the PABX
Gigaset SL375 / AUS / A31008-M1903-C401-1-7619 / pabx.fm / 14.8.07
Ve
rs
ion 4,
16
.09.
2005
Connecting the base station
to the PABX
The following settings are only necessary
when your PABX requires them; see the
PABX user guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Dialling modes and recall
The current setting is indicated by .
Changing the dialling mode
The following dialling modes can be
selected:
u
Tone dialling (DTMF)
u
Pulse dialling (DP)
w
¢
Ð
¢
Base
¢
Add. Features
¢
Dialling Mode
s
Select dialling mode (
= on)
and press
§OK§
.
a Press
and
hold (idle status).
Setting recall
w
¢
Ð
¢
Base
¢
Add. Features
¢
Recall
s
Select recall (
= on) and
press
§OK§
.
a Press
and
hold (idle status).
Saving an access code
(outside line code)
Precondition: You may have to enter an
access code for external calls in your PABX,
e.g. "0".
w
¢
Ð
¢
Base
¢
Add. Features
¢
Access Code
~
Enter or change access code,
max. 3 digits.
¤
Save changes: (page 65).
If an access code has been saved,
u
The access code is prefixed automati-
cally when you select from the follow-
ing lists: numbers of the SMS centres,
call history or answer machine list.
u
The access code must be entered when
dialling manually and when manually
entering directory, emergency/ quick
dial numbers and SMS centre numbers.
u
If you copy recipient's number from the
directory when sending a SMS, you
have to delete the access code.
u
You delete an existing access code
with
X
.
‰
‰
‰