Samsung SWF-P10 - Manual (Page 11)

Washing a Load of Laundry
9 SAMSUNG Washing Machine Owner’s Instructions
You will see the indicators light up on the control panel.
9. At this time, you can control the wash temperature, spin speed and
delay time by pressing option button.
Example) In SWF-P12 case, if you want 40°C, 1000 rpm, press the
tempera ture button 5 times and then press the spin button 6 times.
10.Press the Start/Pause button on the Fuzzy Control dial and the wash
cycle will begin.
The time delay indicator will light up and the remaining time for the
cycle will appear in the display.
When the cycle is finished:
When 10 minutes passed after total cycle is finished, then power will turn off
automatically.
1. Press the Door Open button.
2. Remove laundry.
Setting prewash
Prewash is only available when washing cotton, synthetic, delicate clothes. To
use prewash:
1. Load the prewash detergent into compartment of the detergent drawer.
2. Select "Cotton" with the Fuzzy Control dial.
3. Press the Function button until the "Prewash" indicator lights up on the
control panel.
4. Press Start/Pause to begin the cycle.
Washing clothes manually
You can wash clothes manually without using the fuzzy logic feature. To do so:
1. Turn on the water at the water source sink.
2. Press the (On/Off) button on the washing machine.
3. Press the Door Open button.
Note: You cannot open the door until you press (On/Off).
4. Open the door.
5. Load the articles one at a time loosely into the drum, without overfilling.
6. Close the door.
7. Put the detergent and, if necessary, softener or prewash detergent, in the
appropriate compartments.
Fuzzy control Door open
Eco
Speedy
Wool
Delicate
Synthetic
Cotton