Samsung 5400 - Manual (Page 37)

|
Handbook 37
The Speed Dial (One Touch) Keypad
The One Touch keys are your fax machine’s most important
tool. Use them for quick, one-touch dialing, and to access
most functions and programming options.
Using the One Touch Keys for Dialing
To use a One Touch key for dialing, just press the appropriate
One Touch key. For each key, you can program up to two
telephone numbers: a primary number, which will always be
dialed first, and an optional alternate number which will be
automatically dialed if the first number is busy or if there is
no answer. You can also use the Search key to find locations
programmed into One Touch keys.
! One Touch Keys available: keys 1– 15 on the main One
Touch panel and keys 16–30 beneath the main One
Touch panel. To access One Touch keys 16–30, simply
lift the main One Touch keypad by the latch on the left
side of the cover. When you’re finished, close the keypad
to continue normal operation and programming.
Using the One Touch Keys for Selecting
Functions and Programming
Use One Touch keys 1–10 for selecting special transmission
and reception functions, for obtaining reports, and for quick
access to programming functions.
To select a function:
1 Press the Select Function key.
2 Press the corresponding One Touch key.
List of One Touch Keys with Descriptions
1/Delayed TX key
Use this key to send a fax at a later time and date (within
three days). Refer to the “Advanced Operations, Sending a
Fax at a Later Date and time” section of this handbook.
2/Broadcast Feeder TX key
Use this key to send a fax to multiple locations or to
switch from memory to the document feeder when
preparing to send a fax. Refer to the “Sending a Fax to
Multiple Locations (Broadcasting)” section of this
handbook.