Samsung 5400 - Manual (Page 67)

|
Handbook 67
Stopping a Transmission
To stop a transmission in progress, follow the instructions
below.
1 Press the Stop key twice. The display shows STOPPED.
2 If documents are stuck partway through the document
feeder, you may see a RELOAD DOCUMENT message on
the display. Press the Stop key again. Your fax machine
feeds the document the rest of the way through the
document feeder.
Shortcut Fax Number Programming
This convenient feature lets you program a number into your
fax machine for future use while you’re sending a fax to it. It
even finds the first available One Touch key (or Auto Dial
number, if all the One Touch keys are programmed) for you to
program.
Use the following procedure:
1 Load the document.
2 Enter the fax number using the numerical keypad.
3 Press the Copy key. The display shows ONE TOUCH
NO.[xx].
The number in brackets
[xx] is the next unprogrammed
One Touch key number.
If all the One Touch keys are programmed, the display
shows
AUTO DIAL NO.[xx], with the number of the next
unprogrammed Auto Dial number shown in brackets [xx].
4 Press Yes
ᮤ to program the location to the number shown
or
press Search to cycle through the available unprogrammed
keys/numbers,
then press Yes
ᮤ to program to the number you want.
Press No
ᮣ to stop the process.
5 The display reads
NO=5551212 [the fax number you entered] ID=.