Samsung Digimax S800 - Manual (Page 23)

ŝ22Ş
Flash ( ) / Left button
ƃ If you press the shutter button after selecting the Auto, Fill-in, Slow sychro
flash, the first flash fires to check the shooting condition (Flash range and
Power ratio of flash).
Do not move until the second flash fires.
ƃ Using the flash frequently will reduce the life of the battery.
ƃ Under normal operating conditions the charging time for the flash is
normally within 6 seconds. If the battery is weak, the charging time will be
longer.
ƃ During the continuous shot, AEB and movie clip mode, the flash function will
not operate.
ƃ Take photographs within the flash range.
ƃ The image quality is not guaranteed if the subject is too close or highly
reflective.
ƃ When taking an image in a poorly lit condtion with the flash, there may be a
white speck in the captured image. The speck is caused by the reflecting of
the flash light from the floating matters. It is not camera malfuction.
INFORMATION
ƃ Flash range (Unit : m)
ƈ When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
ƈ When the menu is not displayed on the LCD
monitor, the LEFT button operates as the FLASH
( ) button.
ƃ Selecting the flash mode
1. Rotate the MODE DIAL to select a RECORDING
mode with the exception of MOVIE CLIP mode.
2. Press the Flash button until the desired flash mode indicator displays on the
LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
WIDE TELE WIDE TELE WIDE TELE
0.8 ~ 3.0 0.8 ~ 2.5 0.2 ~ 0.8 0.4 ~ 0.8 0.2 ~ 3.0 0.4 ~ 2.5
ISO
AUTO
[Selecting the Auto flash]
Normal Macro Auto macro