Samsung Digimax S800 - Manual (Page 46)

ŝ45Ş
ƃ Start the slide show : The slide show can start only in the [Show] menu.
1. Use the Up / Down buttons to select the [Show]
menu and press the Right button.
2. Select a desired sub menu by pressing the
Up / Down button.
[Play] : The slide show is closed after one
cycle.
[Repeat Play] : The slide show is repeated until
cancelled.
3. Press the OK button and the slideshow will be started.
ƃ Setting play interval: Set the slide show play interval.
1. Select the [Interval] sub menu by pressing the
UP / DOWN button and press the RIGHT button.
2. Use the Up / Down buttons to select the desired
interval.
3. Press the OK button to save the configuration.
ƃ The loading time depends on the image size and quality.
ƃ While the slide show is playing, only the first frame of a MOVIE file is
displayed.
ƃ While the slide show is playing, the voice recording file will not display.
INFORMATION
ƈ Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT / RIGHT button and select the [SLIDE] menu tab.
Setting up the play back function using the LCD monitor Starting the slide show
SLIDE
Show
Interval
Effect
Back: Set:OK
Play
Repeat Play
SLIDE
Show
Interval
Effect
Back: Set:OK
1 sec
3 sec
5 sec
10 sec
Menu tab Main menu Sub menu Secondary menu Page
Auto
Plain
Photo
Fastphoto
Auto
Draft
Normal
Fine
Auto
Date Off
On
Auto
File name Off
On
Standard -
Index -
No -
Yes -
No -
Yes -
Type
p.53
ſ Menus are subject to change without prior notice.
Quality
CUSTOM
SET
p.53
p.54
p.54
PRINT
DPOF PRINT
RESET