Samsung HT-AS730S - Manual (Page 50)

0
USing tHe SUrrOUnD mODeS (Continued)
Using the SUrrOUnD button on the front of the main unit
Selecting the nEO:6 mode
Press SURROUND button briefly to select “NEO:6” mode.
Each time you press this button, STEREO  PLIIx  NEO:6  SFE will be selected in turn.
Press SELECT ( .,, ) button.
Each time you press this button, MUSIC  CINEMA will be selected in turn.
Selecting the SfE mode
Press SURROUND button to select ‘SFE’ Mode.
Each time you press this button, STEREO  PLIIx  NEO:6  SFE will be selected in turn.
Press SELECT( .,, ) button.
Each time you press SELECT ( .,, ) button,
HALL 1HALL 2 J.CLUB  CHURCH  ROCK  CLASSIC  LIVE  GAME will be
selected in turn.
Selecting the PLiix mode
Press SURROUND button to select “PLIIx” mode.
Each time you press this button, STEREO  PLIIx NEO:6  SFE will be selected in turn.
Press SELECT( .,, ) button.
Each time you press SELECT ( .,, ) button, MOVIE  MUSIC  GAME  MATRIX  PL will
be selected in turn.
You cannot use Dolby Pro Logic llx mode for multi channel signals such as Dolby Digital and DTS.
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or
48KHz.
Sound will not be output from the surround back speaker if the PCM audio signal is mono.
Selecting the STEREO mode
Press SURROUND button to select “STEREO” mode.
Each time you press this button, STEREO  PLIIx NEO:6  SFE will be selected in turn.
1.
~
2.
~
1.
~
2.
~
1.
~
2.
~
M
`
`
`
~
HT-AS730S-XAA_0204.indd 50 2009-02-05 �� 11:48:17