Samsung HT-AS730S - Manual (Page 52)

52
USING THE SPEAKER ADJUSTMENT BUTTONS
Using the SPK SELECT button
Press SPK SELECT button to select the speaker you want.
Each time you press this button, FRONTCEN  SURR 
S.BACK  S.W  CROVR  SPK MODE OFF will be selected
in turn
Press ▲▼ button to set the mode (Large, Small etc.) for the selected
speaker.
Repeat steps 1-2 to set the mode for each speaker.
Using the SPK LEVEL button
Press SPK LEVEL button to select the speaker you want.
Each time you press this button, F.L  F.R CEN  S.L  S.R

SBL  SBR  S.W SPK LVL OFF will be selected in turn.
Press ▲▼ button to set the speaker level you want.
You can adjust it from -10 to +10dB by 1 step.
The sound gets quieter at -10dB and louder at +10dB.
Using the Test Tone button
Press TEST TONE button.
Test signal will be automatically output as follows; F.L  CEN  S.W

F.R  S.R  SBR  SBL  S.L
During test tone output, press ▲▼ button to adjust the speaker output
level from -10 to +10 dB in 1 step increments.
1.
•
2.
•
1.
•
2.
•
•
•
•
HT-AS730S-XAA_0205.indd 52 2009-02-05 �� 3:59:38