Other important safety information, Product performance – Samsung DM-S105 User Manual

Page 91

Advertising
background image

91

BACK to toC

seCtIon 13 HEALTH AND SAFETY INFORMATION

OThER IMPORTANT SAFETY INFORMATION

Other Important Safety Information
Only qualified personnel should service the phone or install the phone

in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.

Check regularly that all wireless phone equipment in your vehicle is

mounted and operating properly.

Do not store or carry flammable liquids, gases or explosive materials in

the same compartment as the phone, its parts or accessories.

For vehicles equipped with an air bag, remember that an air bag inflates

with great force. Do not place objects, including both installed or
portable wireless equipment in the area over the air bag or in the air bag
deployment area. If wireless equipment is improperly installed and the
air bag inflates, serious injury could result.

Switch your phone off before boarding an aircraft. The use of

wireless phone in aircraft is illegal and may be dangerous to the
aircraft’s operation.

Failure to observe these instructions may lead to the suspension or

denial of telephone services to the offender, or legal action, or both.

PRODUCT PERFORMANCE
Getting the Most Out of Your Signal Reception

The quality of each call you make or receive depends on the signal strength
in your area. Your phone informs you of the current signal strength by
displaying a number of bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
If you’re inside a building, being near a window may give you
better reception.

Understanding the Power Save Feature

If your phone is unable to find a signal after 15 minutes of searching, a Power
Save feature is automatically activated. If your phone is active, it periodically
rechecks service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on
the screen.
When a signal is found, your phone returns to standby mode.

Understanding How Your Phone Operates

Your phone is basically a radio transmitter and receiver. When it’s turned on,
it receives and transmits radio frequency (RF) signals. When you use your
phone, the system handling your call controls the power level. This power
can range from 0.006 watts to 0.2 watts in digital mode.

Maintaining Your Phone’s Peak Performance

For the best care of your phone, only authorized personnel should service
your phone and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
If your phone is equipped with an external antenna, hold the phone

with the antenna raised, fully-extended, and over your shoulder.

Do not hold, bend, or twist the phone’s antenna, if applicable.
Do not use the phone if the antenna is damaged.
If your phone is equipped with an internal antenna, obstructing the

internal antenna could inhibit call performance.

Speak directly into the phone’s receiver.
Avoid exposing your phone and accessories to rain or liquid spills. If your

phone does get wet, immediately turn the power off and remove the
battery. If it is inoperable, call Customer Care for service.

Advertising
This manual is related to the following products: