Samsung HT-DS1000 EN - Manual (Page 20)

Connecting the Video Out to TV
19
The Component input may be marked ‘DVD input’
depending on the TV.
• If the TV only supports a resolution of 480i, the screen
may be divided into 2 screens, or display nothing.
Note
Video Out
• Video (Normal): normal type of video with combination of color signals and black and white signals.
• Component Video: video output with separation of red (P R ), blue (P B ), and green (Y) signal for the most
distinct and clear picture.
Connect if the TV component input supports the resolution of over 480p.
Connect the Video Out to the Video In
on the TV.
1
Set the Video Input source on your TV
to the corresponding Video output on
your Home Theater.
2
Method1
When you connect to Video Out (supplied)
Connect the component output (P
R
, P
B
,
Y) to the component input on the TV
(P
R
, P
B
, Y).
• Be sure to make the correct connections between the
when you connect the component output jacks to the
TV. If these are connected wrong, the screen may
show red or blue, or there may be no screen at all.
1
Set the Video Input source on your TV
to the corresponding Component output
on your Home Theater.
2
Method 2
When you connect to Component Out
1p~44p(DS1000)-sea 9/15/04 2:43 PM Page 22