Sony Cyber-shot 4-130-938-12(1) - Manual (Page 121)

Table of contents
Operation
Sea
rch
HOME/MENU
Sea
rch
Index
121 GB
Viewing an image on a SD TV
(DSC-T900)
For details on using this function for DSC-T90, see pages 127 to 129.
You can view images recorded on the camera in standard picture quality by connecting the
camera to an SD (Standard Definition) TV. The connection varies according to the type of TV
the camera is connected to. See “TV TYPE” (page 69). Refer also to the operating instructions
supplied with the TV.
1 Turn off both the camera and the TV.
2 Attach the camera to the multi-output stand (supplied).
3 Connect the multi-output stand to the TV using the AV Cable (supplied).
4 Turn on the TV and set the input.
5 Press (Playback) button to turn on the camera.
Images shot with the camera appear on the TV. Touch / displayed on the LCD screen of
this camera to select the desired image.
• When you play back a single image, no icons are displayed on the TV.
• When using the camera abroad, it may be necessary to switch the video signal output to match that of
your TV system (page 68).
• When you shoot movies in the condition where the camera and a TV are connected using an AV Cable,
the image being shot is not displayed at the TV side.
Notes
1 To audio/video
input jacks
AV Cable (supplied)
VIDEO AUDIO
(Playback) button
2 To the A/V OUT
(STEREO) jack
Multi-output stand
(supplied)