Sony ZS-H10CP User Manual

Personal audio system, Zs-h10cp, Warning

Advertising
background image

ZS-H10CP.US.2-672-606-11(1)

WARNING

To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
To avoid electric shock, do not open
the cabinet. Refer servicing to qualified
personnel only.

To reduce the risk of fire, do not cover the ventilation of
the apparatus with newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the apparatus.
To reduce the risk of fire or electric shock, do not
place objects filled with liquids, such as vases, on the
apparatus.
Connect the AC power adaptor to an easily accessible
AC outlet. Should you notice an abnormality in the
AC power adaptor, disconnect it from the AC outlet
immediately.
Do not install the appliance in a confined space, such as
a bookcase or built-in cabinet.

2-672-606-

11(1)

Personal Audio System

Operating Instructions

US

ZS-H10CP

© 2006 Sony Corporation

Printed in China

Printed on 100% recycled paper

using VOC (Volatile Organic

Compound)-free vegetable oil

based ink.

CAUTION

The use of optical instruments with this product will
increase eye hazard.

Information

For customers in the USA
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:

— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and

receiver.

— Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.

Notes on DualDiscs

A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.

Music discs encoded

with copyright protection

technologies

This product is designed to playback discs that
conform to the Compact Disc (CD) standard. Recently,
various music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.

MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and Thomson.

For customers in the USA

Please register this product on line at

http://www.sony.com/productregistration
Proper registration will enable us to send you periodic
mailings about new product, services and other
important announcements. Registering your product
will also allow us to contact you in the unlikely event
that the product needs adjustment or modification.
Thank you.

Power sources

Specifications

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 3.2-ohm loads, both channels driven from 150 - 10 000 Hz; rated 1.4 W
per channel-minimum RMS power, with no more than 10 % total harmonic
distortion in AC operation.

Other specifications

CD player section

System

Compact disc digital audio system

Laser diode properties

Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of

about 200 mm from the objective lens surface on the

optical pick-up block with 7 mm aperture.)

Number of channels

2

Frequency response

20 - 20 000 Hz 1 dB

Wow and flutter

Below measurable limit

Radio section

Frequency range

FM: 87.5 - 108 MHz
AM: 530 - 1 710 kHz

Antennas

FM: Telescopic antenna
AM: Built-in ferrite bar antenna

General

Speaker

Full range: 10 cm (3

7

/

8

inches) dia., 3.2

, cone type (2)

Inputs

AUDIO IN jack (stereo minijack): minimum input level 245 mV

Outputs

Headphones jack (stereo minijack):
For 16 - 68

impedance headphones

Power output

2.3 W + 2.3 W (at 3.2

, 10 % harmonic distortion)

Power requirements

DC IN 9 V jack accepts:
Supplied AC power adaptor for use with 120 V AC, 60 Hz
9 V DC, 6 R20 (size D) batteries

Battery life

CD playback
Sony R20P: approx. 3 h
Sony alkaline LR20: approx. 10 h
Radio reception
Sony R20P: approx. 14 h
Sony alkaline LR20: approx. 28 h

Basic Operations

*

 button

has a tactile dot.

** The

(headphones) jack

, AUDIO IN jack

and AUDIO

IN button

are covered with a rubber cap.

Before using the unit

To turn on/off the power
Press POWER

.

To adjust the volume
Turn VOLUME towards + or –

.

To listen through headphones
Connect the headphones to the

 (headphones) jack

.

To reinforce the bass sound
Press MEGA BASS

.

“MEGA BASS” appears in the display.
To return to normal sound, press the button again.

Playing a CD/MP3 disc

1

Press

when the unit is not in CD mode.

2

Pull PULL OPEN

, and place a disc with the

label side up on the CD compartment.
To close the CD compartment, press PULL OPEN

until it clicks.

3

Press

.

The unit plays all the tracks/MP3 files once.
When you play an MP3 disc, “MP3” appears in the
display after the unit reads the file information.

Audio CD

Track

number

Playing

time

MP3 disc

MP3 file

number

After the folder name

*

, song title

and artist name are displayed,

the playing time

**

will appear.

* If there is no folder, “ROOT” appears in the display.
** If the playing time is more than 100 minutes, it appears “--:--” in

the display.

To

Do this

Pause playback

Press

. To resume play, press

it again.

Stop playback

Press

.

Go to the next
track/MP3 file

Press

.

Go back to the
previous track/
MP3 file

Press

.

Select a folder on
an MP3 disc

Press TUNE/FOLDER +

 to go

forward or press TUNE/FOLDER

 to go backward.

Play the selected
folder only (MP3
disc only)

Press MODE

until “FLDR”

appears, press TUNE/FOLDER +
or –

 to select a folder and then

press

to start playing.

Locate a point
while listening to
the sound

Press

(forward) or

(backward)

 while playing and

hold it until you find the point.

Locate a point
while observing
the display

Press

(forward) or

(backward)

 in pause and hold it

until you find the point.

Remove the CD

Pull PULL OPEN

.

Tips
• Playback starts from the track/MP3 file you last stopped playing

(Resume play). During stop, the track/MP3 file number to be played
is displayed.

• To cancel the resume play (to start play from the beginning of the

first track/MP3 file), press

in stop mode. The resume play is

also canceled when you open the CD compartment.

2

to a wall outlet

1

to DC IN 9V

Connect the AC power adaptor

 or insert six R20 (size D) batteries (not supplied) into the battery compartment .

Notes

• Replace the batteries when the OPR/BATT indicator

dims or when the unit stops operating.

Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the unit.

• To operate the unit on batteries, disconnect the AC power adaptor from the unit.

Dimensions

Approx. 558 Ч 292 Ч 275 mm (w/h/d)
(22 Ч 11

1

/

2

Ч 10

7

/

8

inches) (incl. projecting parts)

Mass

Approx. 6.4 kg (14 lb) (incl. batteries)

Supplied accessories

AC power adaptor (1)

Design and specifications are subject to change without notice.

Optional accessories

Sony MDR headphones series

Example of folder structure and playing

order
The playing order of the folders and files is as follows:

Notes on MP3 discs
• When the disc is inserted, the unit reads all the files on that disc.

During this time, “READING” is displayed. If there are many
folders or non-MP3 files on the disc, it may take a long time for
play to begin or for the next MP3 file to start play.
We recommend that you do not save unnecessary folders or files
other than MP3 ones in the disc to be used for MP3 listening.

• A folder that does not include an MP3 file is skipped.
• Maximum number of files: 255

Maximum number of folders: 150 (including the root folder)
Maximum number of folders and files in total: 256
Maximum directory levels: 8

• Folder names and file names can be displayed with up to 30

characters including quotation marks.

• The characters that can be displayed on this unit are listed below:

– A - Z
– 0 - 9
– _ " $ % ' ( ) * + , – . / \ ` @ |

Other characters are displayed as “_”.
• This unit conforms to Version 1.0, 1.1, 2.2, 2.3 and 2.4 of the ID3

tag format. When the file has ID3 tag information, the song title,
artist name and album name can be displayed and “ID3” appears
in the display. If the file does not have ID3 tag information, the
file name appears instead of the song title, the folder name appears
instead of the album name and “NO ARTIST” appears instead of
the artist name. ID3 tag information can be displayed with up to 15
characters.

• When naming, be sure to add the file extension “mp3” to the file

name.

• If you put the extension “mp3” to a file other than an MP3 file, the

unit cannot recognize the file properly and will generate random
noise that could damage your speakers.

• The file name does not correspond to the ID3 tag.

Listening to the radio

1

Press RADIO•BAND•AUTO PRESET

repeatedly.
Each time you press the button, the indication
changes as follows:
“FM”

 “AM”

2

Hold down TUNE/FOLDER + or –

 until the

frequency digits begin to change in the display.
The unit automatically scans the radio frequencies
and stops when it finds a clear station.
If you can not tune in a station, press TUNE/
FOLDER + or –

 repeatedly to change the

frequency step by step.
When an FM stereo broadcast is received, “ST”
appears.

Tip
If the FM stereo broadcast contains noise, press MODE

until

“MONO” appears in the display, and the radio will play in monaural.

Owner’s Record

The model number and the serial number are located at the bottom of the unit.
Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. ZS-H10CP

Serial No.

Insert the batteries starting

with the bottom row.

Advertising