If wireless transmission is unstable – Sony BDV-T57 User Manual

Page 47

Advertising
background image

Externa

l A
u

dio De

vic
e

47

US

When using S-AIR products, neighbors may
also receive your system’s sound if IDs are the
same, or you may receive sound from neighbors.
To prevent this, you can identify the unit with a
specific S-AIR sub unit by performing the
pairing operation.
When you perform pairing, wireless
transmission is activated between the paired
main unit and S-AIR sub unit only.

1

Place the S-AIR sub unit that you want
to pair near the unit.

2

Match the IDs of the unit and the S-AIR
sub unit.

• To set the ID of the unit, see “To set the ID

of the unit” (page 45).

• To set the ID of the surround amplifier,

refer to the operating instructions of the
surround amplifier.

• To set the ID of the S-AIR receiver, refer

to the operating instructions of the S-AIR
receiver.

3

Press HOME.

The home menu appears on the TV screen.

4

Press

C/c to select

[Setup].

5

Press

X/x to select [System Settings],

then press

.

6

Press

X/x to select [S-AIR Settings],

then press

.

The [S-AIR Settings] display appears.

7

Press

X/x to select [Pairing], then

press .

8

Start pairing of the S-AIR sub unit.

x For the surround amplifier

Refer to the operating instructions of the
surround amplifier.

x For the S-AIR receiver

Refer to the operating instructions of the
S-AIR receiver.

9

Press

C/c to select [Start], then press

.

The unit starts pairing.
The PAIRING indicator of the surround
amplifier flashes when pairing starts.
When wireless transmission is activated,
the PAIRING indicator of the surround
amplifier turns on.
To cancel pairing, select [Cancel].

Note

• Perform pairing within several minutes of Step

9. If you do not, [Pairing failed. Retry?] appears
on the TV screen. To continue pairing, select
[OK] and press

, then start again from Step 8.

To cancel pairing, select [Cancel].

To cancel pairing

Change the ID of the main and sub unit
(page 45).

If you use multiple wireless systems, such as
wireless LAN or Bluetooth, the transmission of
S-AIR signals or other wireless signals may be
unstable. In this case, the transmission may be
improved by changing the following [RF
Change] setting.

1

Press HOME.

The home menu appears on the TV screen.

2

Press

C/c to select

[Setup].

3

Press

X/x to select [System Settings],

then press

.

Identifying the unit with a
specific S-AIR sub unit
(Pairing operation)

For the surround amplifier
For the S-AIR receiver

If wireless transmission is
unstable

For the surround amplifier
For the S-AIR receiver

Advertising
This manual is related to the following products: