Using the sleep timer, Deactivating the buttons on the unit, Controlling your tv with the supplied remote – Sony BDV-T57 User Manual

Page 54: Preparing the remote for controlling the tv, Using the sleep timer deactivating the buttons on, The unit, Controlling your tv with the supplied, Remote, E 54, E 54)

Advertising
background image

54

US

9

Press

X/x to select [Off], then press

.

Note

• The test tone signals are not output from the HDMI

OUT jack.

Tip

• To adjust the volume of all the speakers at one time,

press VOL +/–.

Using the Sleep Timer

You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
The time can be preset in intervals of 10
minutes.

Press SLEEP.

Each time you press SLEEP, the minutes display
(the remaining time) changes by 10 minutes.
When you set the sleep timer, “SLEEP” flashes
in the front panel display.

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly to select the desired
time.

Deactivating the Buttons
on the Unit

(Child Lock)
You can deactivate the buttons on the unit
(except for "/1) for preventing misoperation,
such as child mischief (child lock function).

Press x on the unit for more than 5
seconds.

“CHILD LOCK” and “ON” appear in the front
panel display.
The child lock function is activated and the
buttons on the unit are locked. (You can operate
the system by using the remote.)

To cancel, press x for more than 5 seconds so
that “CHILD LOCK” and “OFF” appear in the
front panel display.

Note

• When you operate the buttons on the unit while the

child lock function is on, “CHILD LOCK” appears in
the front panel display.

Controlling Your TV with
the Supplied Remote

By adjusting the remote signal, you can control
your TV with the supplied remote.

Note

• When you replace the batteries of the remote, the

code number may reset itself to the default (SONY)
setting. Reset the appropriate code number.

Press and hold TV [/1 while entering your
TV’s manufacturer’s code (see the table)
using the number buttons. Then release TV
[/1.

If the setting is unsuccessful, the currently
registered code is not changed. Re-enter the
code number.

Code numbers of controllable
TVs

If more than one code number is listed, try
entering them one at a time until you find the
code that works with your TV.

Preparing the remote for
controlling the TV

Manufacturer

Code number

SONY

01 (default)

SAMSUNG

02, 06

PANASONIC

05

LG

02

TOSHIBA

04

SHARP

03

Advertising
This manual is related to the following products: