Samsung HL-R4677W - Manual (Page 15)

English - 15
Rear Panel Jacks
Use the rear panel jacks to connect components such as a VCR. You can connect different components
such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and
two sets of component video input jacks on the rear panel of your TV. For more information, please see
“Connections”.
ΠANTENNA terminals
Two independent cables or antennas can be connected to these
terminals. Use “Cable IN” and “Air IN” terminals to receive a signal
from VHF/UHF antennas or your cable system. Use the “Cable OUT”
terminal to send the signal being received by the “Cable IN”
terminal out to another component (such as a Cable Set-Top Box).
(Refer to page 20)
´ S-VIDEO INPUT jacks
Connects an S-Video signal from an S-VHS VCR or DVD player.
(Refer to page 25)
ˇ DVI (Digital Video Interface) AUDIO INPUT jacks
Connect to the digital audio output jacks of a device with DVI
output. (Refer to page 27)
¨ VIDEO/AUDIO INPUT jacks
Connect video/audio signals from external sources, such as VCR or
DVD players. (Refer to page 26)
ˆ VIDEO/AUDIO OUTPUT jacks
Sends video/audio signals from the TV to an external source, such
as a VCR. These jacks are available only in RF, Video and S-Video
modes.
Ø COMPONENT1, 2 jacks (Y, P B , P R, L, R)
Use these jacks to connect the component video/audio signals from
a DVD player or a Set-Top Box. (Refer to pages 26~27)
∏ DIGITAL AUDIO OUT(OPTICAL) jack
Connect to a Digital Audio Component. (Refer to page 29)
” Anynet
Please refer to the Anynet Owner’s Instruction.
’ HDMI (High Definition Multimedia Interface)/
DVI INPUT jack
Connect to the HDMI jack of a device with HDMI output.
Connect to the digital video output jack for device with DVI output.
(Refer to pages 27~28)
˝ CableCARD TM
Insert the CableCARD into the slot. (Refer to page 24)
Ô SERVICE
This jack is for repair and software upgrades.
1_BP68-00460A-01(02~17) 1/21/05 4:18 PM Page 15