Samsung HL-R4677W - Manual (Page 44)

English - 44
Operation
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable).
Setting the Signal Source
1 Press the MENU button.
Press the ENTER button to
select “Input”.
2 Press the ENTER button to
select “Source List”.
Press the … or † button to
select a signal source, then
press the ENTER button.
Alternate method
Press the SOURCE button on the
remote control repeatedly to
select an external signal source.
AV1
• When you connect
equipment to the TV,
you can choose
between the following sets of jacks: “AV1”, “AV2”,
“S-Video1”, “S-Video2”, “Component1”, “Component2”
or “HDMI/DVI” on the TV’s rear panel and “AV3” or
“S-Video3” on the TV’s side panel.
• HDMI input can be selected only when the external
device is turned on and connected to the TV.
Input
Source List : TV √
Edit Name √
Anynet
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
Source List
TV
AV1 ----
AV2 ----
AV3 ----
S-Video1 ----
S-Video2 ----
▼ More
Move Enter Return
Input
Picture
Sound
Channel
Setup
Guide
3_BP68-00460A-01(32~53) 1/21/05 4:35 PM Page 44