Solo USA MISTBLOWER 444 - Manual (Page 2)

ENGLISH 2
Preface
Dear Customer,
We congratulate you on your new SOLO
Mistblower and hope that you will be satisfied with this
modern tool.
A state-of-the-art single cylinder two-cycle engine
with Nikasil coated cylinder bore combined with
renowned SOLO technology of high performance with
low fuel consumption will guarantee a high degree of
application value of this product.
Read this operating manual carefully before using
the machine for the first time and at all times, strictly
observe all safety rules.
To retain peak performance of your SOLO
Mistblower over a long period we recommend you
carefully observe all maintenance instructions.
Should you require any further information after
carefully studying this manual, please contact your
specialist SOLO Dealer.
In the best interest of continued technological
progress we reserve the right to change the design and
configuration of any product without prior notice.
For that reason, no claims can be accepted with
reference to text and illustrations in this manual.
CE Declaration of conformity
SOLO Kleinmotoren GmbH, Stuttgarter Strasse 41,D-
71069 Sindelfingen, certifies that the following product
in the version as supplied
Description of product:
Mistblower
Model/type description: 444 450
Sound power level (ISO 3744)
guaranteed 99
100 dB(A)
measured 98 99 dB(A)
complies with the following EU guide lines:
98/37/EC, 2000/14/EC and RL - 2004 - 108 EC for
electromagnetic compatibility.
Applied standards:
ISO 12100 part 1, part 2, DIN EN 294
Conformity assessment procedures: Appendix V
Serial number, Build year Î Type plate
This Declaration of Conformity will become invalid if the
product is modified, changed or altered without prior
approval.
Sindelfingen, 1 st January 2008
SOLO Kleinmotoren GmbH Wolfgang Emmerich
Managing Director
Symbols
The following symbols are used in this manual and on
the product:
Thoroughly read these operating
instructions before undertaking any
maintenance, installation and cleaning
steps
Always handle this power tool with
particular care
Prohibited
Wear eye and ear protection
A breathing mask should be worn when
using poisonous chemicals
Do not smoke
No open flame
Starting of engine
Switch off engine
Wear protective gloves
fuel mixture
choke open
choke closed
Parts subject to wear and tear
Various parts are subject to application-specific or
normal wear and must be replaced in good time, when
required. The following parts are subject to normal
wear and are not covered by the manufacturer's
guarantee:
• Air filter
• Fuel filter
• All rubber parts which come into contact with fuel
• Spark plug
• Starter