Samsung SV7000W - Manual (Page 13)

25
GB
Using the Timer Programming Feature
24
This function enables you to record up to nine hours of programs.
Your VCR stops automatically after the preset length of time.
1 Switch on the television.
2 Select the AV input on the television for use with your VCR.
3 Insert the cassette on which the program is to be recorded.
Result:
The VCR is switched on automatically.
4 Select:
◆ the station to be recorded using the CH ( or ) buttons ;
or
◆ the AV source using the INPUT button for a satellite tuner or
external video source
Result: The channel number is displayed and the program can
be seen on the television.
5 Select the recording speed by pressing the REC.SPEED button as
many times as required (see page 22).
6 Press the REC button for at least one second to start recording.
Result:
The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 36).
7 Press the REC button several times to increase the recording time
in:
◆ 30-minute intervals up to four hours ; or
◆ 1-hour intervals up to nine hours.
Result: The length is displayed on the VCR and television
displays. The selected program is recorded for the
length of time requested. At the end of that time, the
VCR stops recording automatically.
8 If you wish to cancel the recording before the end, press POWER.
☛
If the end of the tape is reached while recording:
◆ the recording stops ; and
◆ the VCR automatically turns off.
Recording a Program with Automatic Stop
INDEX REC.SPEED CLK/COUNT PICTURE TIMER
ART INPUT
1 2 3
4 5 6
7 8 9
0
CLR/RST 100
CH
REW
PLAY F.F
STROBE AUDIO
4
DISPLAY MONITOR A.DUB
REC P/ST
INPUT OUTPU
STOP
VPS PDC
SLP VCR
L
AUTO
NTSC4.43
PAL-MN
MESECAM
CONVERSION
STROBE
ART
THROUGH
NTSC4.43
PAL-MN
MESECAM
OUTPUT INPUT INDEX DUB SQPB DTR INDEX DUB Hi-F Hi-Fi
R
+10
+5
0
-10
-20
-30
-40
6
4
5
EJECT
TRACKING SPEED AUDIO OUT RESET
NORMAL(VHS) SQPB ONLY
VIDEO
LINE 1 IN
AUDIO L R
PLAY STOP F.F REW REC PAUSE/STILL THROUGH NTSC NTSC4.43 MESECAM PAL-M SECAM PAL-N
AUTO SECAM PAL-M PAL-N
POWER
PAL NTSC PAL
CHANNEL
INPUT OUTPUT
The Timer Programming feature enables you to preset the VCR to
record a program up to one month before it is to be broadcast. Up
to six programs can be preset.
☛
Before presetting a recording, check that the date and
time are correct. If not, refer to page 17. If the clock has
not been set, the Date/Time Setting function is activated
automatically.
1 Insert the cassette and press the TIMER button.
Result:
The Timer selection is displayed.
2 Press to select the standard timer.
3 Select the required channel by pressing the or buttons or
INPUT to select the SC, AV, L l or L2 input sources.
4 Press to select the recording day.
5 Select the required day by pressing the or buttons.
➢ DLY (daily program).
W-SU, W-MO, ...., W-SA(weekly program).
6 Press to select the recording start time.
7 Select the required hour value by pressing the or buttons.
8 Press to select the minutes.
9 Select the required minute value by pressing the or buttons.
10 Press to select the recording stop time.
11 Select the required recording stop time by pressing the or
buttons, following the same procedure as when selecting the
recording start time.
12 Press to select the REC SYSTEM.
13 Select the required recording system value by pressing the
or buttons. Offset value is THROUGH.
14 Press to select the recording speed.
15 Select the required recording speed value by pressing the
or buttons. Offset value is SP.
Result: If you select AUTO mode, the VCR compares the
timer duration with the remaining time on the cassette.
If the tape is not long enough, the speed automatically
changes from SP to LP/SLP.
16 When you have finished, press the MENU button.
Result:
SET is displayed, indicating that the VCR has been
programmed.
17 Press the VCR POWER button to activate the timer.
X REC.SPEED CLK/COUNT PICTURE TIMER
ART INPUT
2 3
5 6
STROBE AUDIO 1
VCR
POWER
INDEX REC.SPEED CLK/COUNT PICTURE
1 2 3
STROBE
17
INPUT
SYSTEM OUTPUT
SYSTEM
AUTO MENU
OK
T R AC KI NG SLO
W
4
CLOCK: 1/JAN FRI 12:32
CH DAY START
→ STOP
❿ --- ---- --:-- → --:-- ❿❿
--- ---- --:-- → --:-- ❿❿
--- ---- --:-- → --:-- ❿❿
--- ---- --:-- → --:-- ❿❿
--- ---- --:-- → --:-- ❿❿
--- ---- --:-- → --:-- ❿❿
# ❷ SET: ❿
DELETE:(CLR/RST) (MENU)
❿ STANDARD TIMER
VCR PLUS
# ❷ ❿ EXIT:(TIMER)