Samsung SV7000W - Manual (Page 21)

41
GB
40
TV System Conversion
You can convert the input signal into the desired TV system.
1 Connect the RCA audio/video cable into the LINE 1 IN jacks on
the front of the VCR.
2 Press the AUTO button on the VCR to select the input signal
identification. (Initial mode is AUTO)
◆ When the Auto mode is selected, the input signal is
automatically identified.
◆ When the input signal is not automatically identified, select the
corresponding input system manually.
3 If you wish to convert the NTSC TV system into the PAL system,
press the AUTO or NTSC input button on the VCR.
Result: The display panel shows the NTSC input signal and
the NTSC output signal.
◆ If the input signal does not correspond to the input
button on the VCR, an abnormal signal is outputted.
4 Press the PAL output system button on the VCR.
Result:
The display panel shows the NTSC input signal and the
PAL output signal, and the NTSC signal is converted
into the PAL signal for output.
You can perform playback conversion of the signal recorded on the
tape into the appropriate format for the country.
1 If you wish to convert a PAL system tape into the NTSC system
for playback, then press the NTSC output button on the VCR.
Result:
The display panel shows NTSC output signal.
2 Insert the video tape into the VCR.
◆ is shown on the display panel.
◆ A video tape without the record protect (safety) tab intact will
play back automatically.
3 Press the PLAY ( ) button.
Result: The TV system recorded on the tape is automatically
read, and the PAL signal is converted into the NTSC
signal for playback.
Playback Conversion
You can copy a cassette on your Samsung VCR from another video
source such as another VCR or a camcorder.
☛
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
1 Connect the VCR from which the cassette is to be copied to the
appropriate RCA audio and video input connectors on the front of
your Samsung VCR, as indicated on page 39.
➢
If the other video source does not supply stereo sound,
connect only the left audio input (L).
You can also use a SCART cable to connect to the EURO
AV on the rear of your VCR.
2 Insert a blank cassette in your VCR.
3 Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4 Press the INPUT button to select the appropriate input on your
VCR:
◆ LINE 1 or LINE 2 ; or
◆ AV for the EURO AV.
5 Start playing back the cassette to be copied.
6 Press the REC button for at least one second to start recording on
your VCR.
7 When you have finished recording, press STOP ( ) on both
VCRs.
➢
If you wish to view the cassette being copied:
◆ the VCR must be connected to your television
(see page 14 for further details) ; and
◆ you must select the television AUX input.
Recording from Another VCR or Camcorder
ART INPUT
2 3
5 6
8 9
0
CLR/RST
CH
STROBE AUDIO
4
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC P/STILL STOP
7
REW
PLAY
F.F
DISPLAY MONITOR A.DUB
REC P/STILL STOP
6
EJECT
TRACKING SPEED AUDIO OUT RESET
NORMAL(VHS) SQPB ONLY
VIDEO
LINE 1 IN
AUDIO L R
PLAY STOP F.F REW REC PAUSE/STILL THROUGH NTSC NTSC4.43 MESECAM PAL-M SECAM PAL-N
AUTO SECAM PAL-M PAL-N
POWER
PAL NTSC PAL
CHANNEL
INPUT OUTPUT
2
VIDEO
LINE 1 IN
AUDIO L R
AUTO NTSC
INPUT
AUTO
SECAM
PAL-M PAL-N
PAL
NTSC
INPUT
2 3
THROUGH NTSC
NTSC4.43
MESECAM
PAL-M
SECAM
PAL-N
PAL
OUTPUT
4
THROUGH NTSC
NTSC4.43
MESECAM
PAL-M
SECAM
PAL-N
PAL
OUTPUT
1
PLAY
STOP
F.F REW
3