Samsung SV7000W - Manual (Page 8)

15
GB
14
You must insert or replace the batteries in the remote control when
you:
◆ purchase the video cassette recorder ; or
◆ find that the remote control is no longer working
correctly.
1 Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2 Insert two AAA or equivalent batteries (supplied), taking care to
respect the polarities.
◆ + on the battery with + on the remote control.
◆ – on the battery with – on the remote control.
3 Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
The VCR automatically displays the initial setting MENU when the
VCR is plugged into the AC outlet for first time.
1 Plug the VCR into the AC outlet.
Result:
The LANGUAGE SET is displayed.
2 Press the , and OK button to select your favorite language.
Result: The COUNTRY SET is displayed.
3 Press the , , button to select your country region.
Result: The country list is displayed.
4 Press the , , and OK button to select your country.
➢
If your country does not appear in the country list, then
select OTHERS.
Inserting the Batteries in the Remote Control
Plug and Initial Setting
1
Connecting Your VCR to the TV
To receive television programs from an over-the-air or cable
television network, a signal must be received from one of the
following sources.
◆ An outdoor antenna.
◆ An indoor antenna.
◆ A cable television system.
☛
Make sure that both the television and the VCR are
switched off before connecting the cables.
1 Remove the 75 Ω coaxial cable from the television.
2 Connect this cable to the 75 Ω coaxial socket marked on the
rear of your VCR.
3 Plug the coaxial cable supplied into the socket on your VCR.
4 Plug the other end of the coaxial cable into the connector
previously used for the antenna on the television.
5 Connect one end of the RCA cable supplied to the output jacks
(OUT1 or OUT2) on the rear of the VCR.
➢
Respect the color coding of the Audio and Video In/Out
cable.
6 Connect one end of the SCART cable to the EURO AV socket on
the rear of the VCR.
7 Plug the other end (of the RCA cable or SCART cable) into the
appropriate connector on the television.
◆ Regardless of the type of connection chosen, you must
always connect the coaxial cable supplied. Otherwise, no
picture will be visible on the screen when the VCR is
switched off.
* NOTICE:
Use the supplied RF adaptors as needed when making RF
connections.
[NTSC/PAL-M Region]
TV
VIDEO
TV
VIDEO
TV
VIDEO
OUT 2
R
L
AUDIO
OUT 1
R - AUDIO - L VIDEO
LINE 2 IN
EURO AV
TV
TV
2
3
6
VIDEO
OUT 2
R
L
AUDIO
OUT 1
R - AUDIO - L VIDEO LINE 2 IN
EURO AV
TV
5
** LANGUAGE SET **
❿ ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPANOL
JAPANESE
# ❷ MEMORY:(OK)
** COUNTRY SET **
EUROPE
❿ AMERICA
ASIA/OCEANIA
MIDDLE EAST/AFRICA
# ❷ ❿
** AMERICA **
❿ U.S.A. CANADA
MEXICO BRAZIL
ARGENTINA CHILE
COLOMBIA VENEZUELA
PERU PANAMA
OTHERS:M
# ❷ ❿ MEMORY:(OK)