Sony KDF-50E3000 - Manual (Page 15)

15
Getti
ng Sta
rted
Use the TV as a monitor for your PC.
PC Input Signal Reference Chart
After connecting the PC to the TV, set the output signal from the PC according to the chart below.
*: Corresponding to the VGA signal.
**: Coordinated Video Timing.
~
• If a signal other than one from the above chart is input,
it may not be displayed properly or may not be
displayed as you set.
• For the best picture quality, it is recommended to use
signals with a 60 Hz vertical frequency from a
personal computer. In plug and play, signals with
60 Hz vertical frequency will be selected
automatically.
• Noise may be detected under certain conditions. If
unsupported signals are used, you will see the
message, “Unsupported Signal”.
PC
Resolution Horizontal
frequency (kHz) Vertical
frequency (Hz)
(Refresh rate)
VESA standard Signals Horizontal
(Dot)
× Vertical
(Line)
VGA 640 Ч 480 31.5 60 –*
640 Ч 480 37.5 75
✔
640 Ч 480 43.3 85
✔
720 Ч 400 31.5 70 –*
SVGA 800 Ч 600 35.2 56
✔
800 Ч 600 37.9 60
✔
800 Ч 600 46.9 75
✔
800 Ч 600 48.1 72
✔
XGA 1024 Ч 768 48.4 60
✔
1024 Ч 768 56.5 70
✔
1024 Ч 768 60 75
✔
WXGA 1280 Ч 768 47.4 60
✔
1280 Ч 768 47.8 60
✔
1152 Ч 648 40.3 60 CVT**
DVI-to-HDMI cable
Audio cable
Audio-R
Audio-L
To audio
output jack