Sharp SD-PX2 - Manual (Page 49)

E-44
ENGLISH
SD-PX2
Ad
v
a
nced Features
- Cha
n
ging the de
fa
ult settings of the ampli
fi
e
r -
When you select "LARGE", all channel signals are sent to the speaker.
When you select "SMALL", frequencies below the value you set for crossover fre-
quency (see page 46) are sent to the subwoofer.
(*) indicates the default setting.
Notes:
z The speaker size setting is only available for the subwoofer if the input is set to
tuner, or the surround is "STEREO" or "VIRTUAL".
z On some DVD-Audio or SACD discs, the subwoofer may not produce sound even
if the speaker size is set to "SMALL".
z "F-SMALL" and "SW-NO" cannot be combined. If the subwoofer is changed to
"SW-NO" while the front speakers are set to "F-SMALL", they are changed to "F-
LARGE". When the front speakers are changed to "F-SMALL" while the subwoofer
is set to "SW-NO", it is changed to "SW-YES".
z If "LARGE" is set for a small speaker, malfunction may result. Be sure to set the
speaker size to "SMALL".
z When the center and surround speakers and subwoofer are not connected, set the
speaker size to "C-NO", "S-NO" and "SW-NO". Otherwise, the protection circuit
may be activated and the power is turned off.
„ Speaker delay setting
When some of the speakers are at a different distance from the listening point, you
can select the speaker delay to make it seem as though the speaker distances are
the same.
Notes:
z The speaker delay setting is only available for the front speakers and subwoofer if
the input is set to tuner, or the surround is "STEREO" or "VIRTUAL".
z The speaker delay setting is invalid while playing DVD-Audio or SACD discs (valid
for the CD layer of SACD discs).
4
Within 10 seconds, press the or button to
select their sizes.
To set sizes of other speakers, repeat the operation
from step 3.
5
Press the RETURN button twice.
The setting is complete.
Speaker type Speaker size
Front speaker (Left, Right) F-SMALL * Small diameter
F-LARGE Large diameter
Center speaker C-SMALL * Small diameter
C-LARGE Large diameter
C-NO OFF
Surround speaker (Left, Right) S-SMALL * Small diameter
S-LARGE Large diameter
S-NO OFF
Subwoofer SW-YES * ON
SW-NO OFF
1
Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET
UP button.
2
Within 10 seconds, press the or button to
select "SP DELAY", and press the ENTER
button.
3
Within 30 seconds, press the or button to
select the desired speaker.
The indicator of the selected speaker flashes.
4
Within 30 seconds, press the or button to
select the distance.
z You can change the distance in 1 foot (0.3 m) steps.
z To set the distance of other speakers, repeat the op-
eration from step 3.
5
Press the RETURN button twice.
The setting is complete.
Speaker type Delay range Default setting
FL Front speaker (Left) 1 to 29 ft 6 ft (2 m)
CT Center speaker 1 to 29 ft 6 ft (2 m)
FR Front speaker (Right) 1 to 29 ft 6 ft (2 m)
SR Surround speaker (Right) 1 to 29 ft 6 ft (2 m)
SL Surround speaker (Left) 1 to 29 ft 6 ft (2 m)
SW Subwoofer 1 to 29 ft 6 ft (2 m)