Saba 31-5023 - Manual (Page 3)

3
Important safty information
FOR YOUR SAFETY, READ AND RETAIN ALL SAFETY
AND OPERATING INSTRUCTIONS. HEED ALL
WARNINGS IN THIS MANUAL AND ON THE UNIT.
POWER SOURCE
To avoid any malfunctions of the unit, and to protect against
electric shock, fire or personal injury, please observe the
followingΚ
xThis system has been designed to work with 120-volt AC
current. Connection to a line voltage other than that may
create a safety and fire hazard and may damage the system.
If you are unsure of the type of power supply to your home,
consult your local dealer or power company.
xHold the plug firmly when connecting or disconnecting the
power cord to the wall outlet.
x Do not run power cords under rugs or carpets or place heavy
objects on them.
xDamaged or deformed power cords are hazardous and should
be replaced immediately by a qualified service technician.
LOCATION
x Air vents are provided in the cabinet to prevent excessive
temperatures inside the unit. Do not place this unit in closed
spaces, cover it, or otherwise block the vents.
x Do not place this unit in direct sunlight, or near heat sources.
x Keep this unit away from strong magnetic objects.
x Do not use the unit in a car. The operation can not be
guaranteed.
x Place the unit in a horizontal position, and do not place
anything heavy on it.
CARE
x Do not insert or drop anything into this unit through the air
vents as this could cause serious damage, possibly resulting
in fire.
x Do not place any object containing water or other liquids on
this unit. In the event that liquid should enter the cabinet,
unplug this unit immediately and contact the retailer or
service center immediately.
x Do not remove the cabinet. Touching parts inside the cabinet
could result in electric shock and damage to the unit.
x Do not put any foreign objects on the disc tray.
Nonuse Periods
x When the unit is not being used, turn the power off.
x When left unused for a long period of time, the unit should be
unplugged from the household AC outlet.
Condensation
Moisture may form on the pickup lens in the following conditions:
x Immediately after a heater has been turned on.
x In a steamy or very humid room.
x When the unit is suddenly moved from a cold environment to a
warm one.
xIf moisture forms inside this unit, it may not operate properly. In
this case, turn on the power and wait about one hour for the
moisture to evaporate.
Volume control
xDo not turn up the volume while listening to a portion with very
low level input or no audio signal. The speaker may be damaged
when a peak level portion is played.
CLEANING
x Unplug the unit before cleaning.
x When the system gets dirty, wipe it with a clean, soft cloth. If
necessary, wipe it with a soft cloth, slightly dampened with mild
soapy water, then a fresh cloth with clean water. Wipe dry
immediately with a dry cloth.
x Never use benzene, aerosol cleaners, thinner, alcohol or any
volatile cleaning agent.
x Do not use abrasive cleaners, as they may damage the finish.
x Avoid spaying insecticide near all components.
xYour speakers require minimal maintenance under normal use.
The cabinet may be cleaned using a damp cloth or a mild,
non-abrasive cleaner. To clean the grille, first remove it from the
speaker, then brush lightly with a soft brush or use a vacuum on its
lowest setting. Do not attempt to clean the actual drivers.
SERVICE
x Do not open the cabinet of any components. There are no
user-serviceable components in this product. Opening the cabinets
may present a shock hazard, and any modification to this product
will void your guarantee.
x Do not attempt to service the unit yourself. If water or any metal
objects such as paper clips, wire or staples accidentally fall inside,
disconnect the unit from the power source immediately, and
consult an authorized service center.
x Please refer any service to the nearest service center.