Sony PCLK-MN10A - Manual (Page 103)

Operating the computer
103
Setting optional items
Setting the audio input from the computer
The following setting must be made when you play or record from CDs
in the CD-ROM drive of the computer or from music files on the hard
disk of your computer.
The PC Input tab in the “Option” dialog box specifies the input
terminal of the system stereo component that is connected to the audio
output terminal (analog/digital) of the PC cabling kit.
Notes
• Before setting the audio input, make sure that the input terminal that you
want to specify in the “PC Input” tab is correctly connected to the PC link kit.
• (For certain system stereo components) If the PC Input setup is not made,
your computer continues to play CDs or music files even if you select another
function.
1
Open the “Option” dialog box (page 38).
2
Click the “PC Input” tab.
A list of the system stereo component input terminals appears. (The
actual input terminals that are displayed depend on the audio
equipment connected).
3
Select the input terminal and click .
Clicking a button selects it. Clicking it again deselects it.