Sony PCLK-MN10A - Manual (Page 71)

Performing MD operations
71
Adding the fade-in effect after recording
You can add a fade-in effect at the beginning of a track. The fade-in can
range from 1 second to 15 seconds.
Notes
• The fade-in effect cannot be added to a track that has been recorded in an LP
mode (LP2 or LP4).
• While this dialog box is displayed, the MD cannot be operated by the system
stereo component.
Before you begin
Please note that it is impossible to undo the results of this MD edit
operation.
1
Open the MD window (page 14).
2
Select the track in the Track Name display in the MD window for
which you want to add the fade-in effect.
3
Click the MD edit button .
The “Fade in” dialog box appears, and Rehearsal playback of the
track starts.
To cancel the fade-in procedure, click .
(continued)