Sony SNC-DH210T - Manual (Page 28)

O
per
at
ing
t
he
Came
ra
Using the System Utility
28
Multicast: This protocol is selectable when
Multicast streaming (page 43) is On. When
Multicast is selected as the transmission port, RTP
(Real-time Transport Protocol) and UDP multicast
techniques are adopted for video transmission. By
selecting it, the network transmission load of the
camera can be reduced. If a router that does not
correspond to a multicast or firewall is installed
between the camera and the computer, video may
not be played back properly. In this case, select
TCP or Unicast.
Using the System Utility
You can download system utility from the tools tab on
the main menu.
To use the utility, click Download to begin download.
SNC viewer
SNC viewer is an application which allows you to set the
initial state of the viewer.
Installing the SNC viewer
1
Execute the downloaded SNCViewer.msi file.
2
Install the SNC viewer following the instructions
on the wizard.
When the license agreement policies are displayed,
agree after reading them carefully and install the
SNC viewer.
Using the SNC viewer
Click SNC viewer in the control panel.