Sony SNC-DH210T - Manual (Page 78)

A
d
mini
s
tra
ting
t
he
Came
ra
Configuring the Viewer — Viewer Menu
78
Still image: JPEG still images are acquired from the
camera and displayed at start-up.
Specified image (URL): Specify a still image of your
choice by URL at start-up.
Auto play: Run to start playback.
Blank: No display at start-up.
Click to start streaming: By ticking this when Still
image or Specified image is selected, you can start
play by clicking on the image.
Tip
If the menu display is Off, Blank cannot be selected.
Initial sound
Set the initial volume for when streaming starts. Check
Muting for muting sound.
Note
This setting is valid only when SNC ActiveX viewer is
selected for Streaming method from Setting of the
Plug-in free viewer control bar. However, this unit is not
equipped with audio functions.
Show menu
Set whether to show or hide operation buttons at the
bottom of the camera image area.
Select On to display the menu, select Off to hide the
menu.
When On is selected, the items below can be set:
Streaming: Displays the setting options of Streaming,
if it is checked.
Image size: Displays the setting menu of Image size, if
it is checked.
Frame rate: Displays the setting menu of Frame rate,
if it is checked.
Preset position: Displays the setting menu of Preset
position, if it is checked.
Trigger: Displays the setting options of Trigger, if it is
checked.
PTZ operation: Displays the setting menu of PTZ
operation mode, if it is checked.
Sound: Displays the setting menu of Sound, if it is
checked.
Note
This unit is not equipped with audio functions.
Capture image: Displays the Capture image button, if
it is checked.
Image codec: Displays the setting menu of Image
codec, if it is checked.
OK/Cancel
See “Buttons common to every menu” on page 32.
HTML output tab
If the monitor is for personal use, this tab can be used to
output sample source for HTML and script.
For details on the setting, refer to “Monitor” of the
Layout tab.
Monitor
Displays a preview.
Preview: Displays a preview on the monitor based on
the current settings.
Default: Resets the setting to that set in Viewer - Layout
tab.
Note
The selected image size is not used for the preview
screen.
Embedded script
Displays the sample source for script.
HTML sample
Displays the sample source for HTML.